No Roads No Problem Patch
- Width:
- 6.00 (in)
- Height:
- 9.00 (in)
- Depth:
- 1.00 (in)
Iron-on instructions
My patches have a commercial grade heat transfer backing, so they need more heat time than a normal patch when applying. They will outlast most other patches when applied properly.
Be sure to use a low setting on your iron. First, heat the garment for a good 30-45 seconds on low to warm it up. Then, put the patch on the warm area of the garment and place a sheet of wax paper over it to protect the fibers of the patch. Use the iron to apply the patch and hold it for about 30-45 seconds and it should stick on really well without a problem.
A heat gun will also work really well to quickly apply patches, but you'll need to be careful so you don't burn your garment or the patch. We use a SEEKONE Heat Gun set to 500º and keep it pulled away from the items for indirect heat, which works really well. Be sure to start with a lower temp and work your way up to avoid damaging your garment.
Other options are a heat press if you have access to one (your local screen print shop might have one) or, oddly enough, a hair straightener actually works even better than an iron because it heats the garment from both sides at once.
Finally, sewing is always an option if you're hardcore or old school.
Additional Info
- Width:
- 6.00 (in)
- Height:
- 9.00 (in)
- Depth:
- 1.00 (in)