Void Stone - The Planar Construct Patch - Limited Edition (Subscription & Patreon Exclusive) - Fragmented Souls
- Width:
- 6.00 (in)
- Height:
- 9.00 (in)
- Depth:
- 1.00 (in)
Exclusive limited edition item for monthly subscribers and Patreon supporters!
Fragmented Souls Series 2 - Void Stone
An ageless relic of unfathomable power, the Void Stone has long been the tether that binds soul to soul. When Dalthomir finally claimed it for his own, he summoned forth an entity unlike one that any reality has ever witnessed: Vorkoth, the Vessel of Deceit.
Drawing upon countless eternities, the Void Stone harnesses a limitless power that decimates and bends reality. To bond with the Void Stone is to assure the demise of the spirit, supplanting an unignorable fate.
In the case of Vorkoth, where no soul is supplied, the Void Stone acts as if it had a soul of its own. An abomination such as this should only exist in myth... and yet Dalthomir has once again defied all that is known.
Monthly Items
This design is from a limited 6 month run in the 2024 monthly pin & patch series. You can join the Order of the Ink on Patreon to recieve:
- Monthly items from this series in the mail
- Random chances to recieve Ultra Rare Gold Metal variants
- The chance to win an original illustration
This is a large, high quality embroidered patch that is approximately 3.5" in diameter and has a heat transfer backing. The patch comes bagged and boarded on a backer card that has the name and release date of the design.
If you missed the month that included this item, it may still be available in the Patreon member Secret Store. You can learn more about my Patreon community here.
Iron-on instructions
My patches have a commercial grade heat transfer backing, so they need more heat time than a normal patch when applying. They will outlast most other patches when applied properly.
Be sure to use a low setting on your iron. First, heat the garment for a good 30-45 seconds on low to warm it up. Then, put the patch on the warm area of the garment and place a sheet of wax paper over it to protect the fibers of the patch. Use the iron to apply the patch and hold it for about 30-45 seconds and it should stick on really well without a problem.
A heat gun will also work really well to quickly apply patches, but you'll need to be careful so you don't burn your garment or the patch. We use a SEEKONE Heat Gun set to 500º and keep it pulled away from the items for indirect heat, which works really well. Be sure to start with a lower temp and work your way up to avoid damaging your garment.
Other options are a heat press if you have access to one (your local screen print shop might have one) or, oddly enough, a hair straightener actually works even better than an iron because it heats the garment from both sides at once.
Finally, sewing is always an option if you're hardcore or old school.
Additional Info
- Width:
- 6.00 (in)
- Height:
- 9.00 (in)
- Depth:
- 1.00 (in)